Monday September 13th, 2004|
Removed Sag From Wings
Here's my method of proping the center of the wing to remove sag while in the jig. I went to the local Home Depot and got a 1/2 inch hollow tube, a 3/8-16 threaded rod, some nuts and some rubber tips. Two of these cost me a whopping total of 11 bucks.
Orchestra rehearsal is tonight, so this was all I was able to squeeze in.
The black marks are where I marked the floor after I made sure I removed the sag. That way I'll know where to prop it if it gets knocked out from under the wing.